Kleenoil 440
| Methods | Units | |
| Density at 15°C | ASTM 1298 | 878 kg/m3 |
| Kinematic viscosity at 40°C (104°F) | ASTM D 445 | 227,5 mm2/s |
| Kinematic viscosity at 100°C (212°F) | ASTM D 445 | 26,6 mm2/s |
| Viscosity Index | ASTM D 2270 | 151 |
| Pour Point |
ASTM D 97 |
-45°C |
| Flash Point | ASTM D 97 | 271°C |
| Fire Point | ASTM D 92 | 300°C |
| Acid Number | ASTM D 974 | 0,21 mg KOH/g |
| Blade demulsification at 82°C (180°F) | ASTM D 1404 | 43/37/0–10 ml/mn |
| Foaming-propensity-persistance | ASTM D 982 | |
| sequence 1 (24°С, 75°F) | < 50/0 ml | |
| sequence 2 (93°С, 199°F) | < 50/0 ml | |
| sequence 3 (24°С, 75°F after 93°С, 199°F) | < 50/0 ml | |
| Antirust test | ||
| procedure A: distilled water | ASTM D 665 | pass |
| procedure B: synthetic sea water | pass | |
| Copper corrosion (3 hrs at 100°C, 212°F) | ASTM D 130 | 1a rating |
| Hydrolysis test (48 hrs at 93°C, 199°F) | ASTM D 2619 | |
| copper value | - 0,01 mg/cm2 | |
| total water acid number | 6 mg KOH/g | |
| oil acid number | 0,3 mg KOH/g | |
| Oxidation Test | ||
| 5µ heptane filter | 2% | |
| deposits | 7,9 mg | |
| deposits % | 0,025% | |
| Catalysers | ||
| Copper appearance | brilliant | |
| value | 2a | |
| weight | -0,4 mg | |
| iron appearance | bright brown | |
| weight | 0,25 mg | |
| Oil acid index | 0,2 mg KOH/g | |
| FZG | ||
| A/8, 3/90 | DIN 51354 | damage level > or = 13 |
| 4 Ball wear Machine | ASTM D 2266 | 0,32 mm |
| Elastomer test 70 hr. - 100°C, 212°F | ||
| nitrile, E1 quality variation in volume | NF E 48610 | 6,9% |
| Fluorocarbon (VITON) | ||
| E2 quality variation in volume | -0,6% | |
| Storage life | At least 12 months in a sealed container at room temperature |
- Description
- Advantages
- Recommendations for use
Kleenoil 440 is an ISO 220, synthetic lubricating oil designed to provide superior performance at elevated temperaturescompared to standard petroleum oils.
Kleenoil 440 is recommended for I.S. machine lubrication; especially areas involving elevated temperatures such asthe plunger mechanism, the hydraulic constant cushioning system, transfer wheels, etc.
Kleenoil 440 iscompatible with petroleum oils and can be used in Lincoln Lube systems withoutspecial cleaning requirements.
Kleenoil 440 is designed to eliminate varnish and carbon build-up, eliminate sticky valves and ensure trouble-free start-ups. It also contains a fluorescent dye which makes it easy toidentify leaks using a U.V. light.
Kleenoil 440 is recommended for I.S. machine lubrication; especially areas involving elevated temperatures such asthe plunger mechanism, the hydraulic constant cushioning system, transfer wheels, etc.
Kleenoil 440 iscompatible with petroleum oils and can be used in Lincoln Lube systems withoutspecial cleaning requirements.
Kleenoil 440 is designed to eliminate varnish and carbon build-up, eliminate sticky valves and ensure trouble-free start-ups. It also contains a fluorescent dye which makes it easy toidentify leaks using a U.V. light.
ELIMINATES CARBON & VARNISH BUILD-UP
LOW COEFFICIENT OF FRICTION EXTENDSLIFE OF EQUIPMENT AND SAVES MONEY
REDUCES MAINTENANCE REQUIREMENTS AS MACHINE AND EQUIPMENT RUN CLEANER
EXTENDS LUBRICATING CYCLE INTERVAL BY AT LEAST A FACTOR OF 5 TIMES
USE LESS OIL; DISPOSE OF LESS OIL EASY START-UP; ESPECIALLY AFTER EXTENDED DOWNTIME
PROVIDES CORROSION PROTECTION; EVENIN PRESENCE OF UP TO 10% WATER
PROVIDES SUPERIOR DEMULSIFICATION
PROVIDES ELASTOMER COMPATIBILITY
MISCIBLE WITH PETROLEUM OIL LUBRICANTS FLUORESCENT DYE IDENTIFIES LEAKS
LOW COEFFICIENT OF FRICTION EXTENDSLIFE OF EQUIPMENT AND SAVES MONEY
REDUCES MAINTENANCE REQUIREMENTS AS MACHINE AND EQUIPMENT RUN CLEANER
EXTENDS LUBRICATING CYCLE INTERVAL BY AT LEAST A FACTOR OF 5 TIMES
USE LESS OIL; DISPOSE OF LESS OIL EASY START-UP; ESPECIALLY AFTER EXTENDED DOWNTIME
PROVIDES CORROSION PROTECTION; EVENIN PRESENCE OF UP TO 10% WATER
PROVIDES SUPERIOR DEMULSIFICATION
PROVIDES ELASTOMER COMPATIBILITY
MISCIBLE WITH PETROLEUM OIL LUBRICANTS FLUORESCENT DYE IDENTIFIES LEAKS
Refer to Material SafetyData Sheet for Kleenoil 440
